Electrical Panel Door Punching Machine

 

Electrical Panel Door Punching Machine

User Friendly punching machine for control cabinet and switchgear construction. The 800 mm throat allow processing of sheet metal plates and control cabinet doors up to 1000 * 2000 mm with a beveling height of upto 40 mm samller doors of 600-1000 mm can be punched near the edge without being turned over fast and easy die change with anti twist protection even while the doors is clamped place nibbling is possible up to 46 *46 mm.

  • The language menu at the control terminal offers a choice of 3 preset languages: German, English and Portuguese.
  • With automatic braking function (program selection) and die management for 30 dies or 99 dies (extra charge).
  • Edge searching function
  • Ethernet interface

TECHNICAL SPECIFICATIONS :

specification Expression
Projection 800 mm
Overall system width 2,500 mm
Total plant depth 1,400 mm
Installation height 1,650 mm
                          System weight (including components) approx. 900 kg
Temple length 1,350 mm
Bracket width 200 mm
Ironing material S 355
Type of use Mobile
Surface coating bracket sandblasted, primed, painted
Lifting speed “from” 18 mm / sec. (At 2.2KW)
Lifting speed “on” 30 mm / sec. (At 2.2KW)
Digital measurement accuracy 1/10 mm
Cutting edge length max. 496 mm
Max. Travel of the X axis 2,200 mm
Max. Travel of the Y axis 700 mm
Electric motor 400V & 3 KW with
Pump unit surcharge

Our Product Live in Action:

800–HPT-V COMES WITH A NUMBER OF ADDITIONAL FUNCTIONS:
  • The punching machine can be operated manually or automatically.
  • In manual mode, the operator can process workpieces for which there is no program or that are custom-made.
  • In automatic mode, the punching machine is programmed at the control terminal or via the Ethernet interface.
  • Up to 30 – optionally up to 99 (extra charge) – different dies can be defined, * Up to 30 – optionally up to 99 (extra charge) – different dies can be defined, saved and managed. A subsequent conversion from 30 to 99 memory locations is not possible.
  • The die management function is password-protected.
  • Data can be written directly into the machine programs via an on-site OPC connection. The program can be started directly at the machine.
  • The punching machine has all the properties of a semiautomatic machine, i.e. workpieces can be processed with computer/software assistance via the Ethernet interface.
  • However, the actual handling of dies, workpieces and the machine itself is done manually by the operator(s).
  • Edge searching function: This function finds the middle position between two reference points. This is ideal if a workpiece is dimensioned from the center and the workpiece edge to be the reference point.
  • The automatic braking function allows the operator to enter the desired punching position at the control terminal. Once the workpiece has been adjusted along the X/Y axis and the selected punching position reached, the brakes are automatically applied (3/10 tolerance) and punching can begin.
DESCRIPTION :
  • Stress relived robust C Frame punch unit firmly mounted to a sturdy base.
  • The super quite dual circuit hydraulic unit and the control system are safely installed in the base.
  • Double acting hydraulic cylinder with integrated laser point.
  • The punching waste falls into a drawer integrated in the punching unit
  • A die drawer with an extension length of 400 mm for storing unused dies is integrated in the base .
  • The punching machine is operated via a modern touchscreen terminal that is fastened to an ergonomic lifting and pivot arm.
  • The stop system (X/Y axis) is easy to adjust can be locked in place with a button at the control terminal once the punching position reached.
  • Exact digital display of the measured displacement from the X and Y axis punching is activated via two hand control at the control terminal.
  • Once punching is complete the die is returned to its original position with the button “Raise die ” The button must be held down until the die has completed its upward travel only then is the brake released.
MAXIMUM MATERIAL THICKNESS
Steel(S235) max 3.0 mm
Stainless steel(1.400V@A) max 2.0 mm
Aluminum(not anodized) max 3.5 mm
Aluminum(not anodized one side) max 3.0 mm.
Aluminum(not anodized both side) max 2.5 mm
STANDARD PUNCHES SELECTION
Round punches From 3.2 mm to 120 mm
Square punches From 12.7 * 12.7 mm to 124 *124 mm
Reactangulaer punches From 20 *21 mm to 19 * 120 mm
Special-shape punches Round punches with anti-twist nib etc.
Special punches Please aquire

If you have any specific questions or need more information related to manufacturing Ironworker machines, feel free to ask!

Know More